Elceram Nitride 1/8 220A Brushless Sensored ESC 2-4S

ELC030
Elceram
€289.00

Buy this product and earn 289 points Buy this product and earn 289 points

Order it before 10 hours and 0 minutes and receive it tomorrow with GLS

  Secure Payment

Pay now with our secure payment systems. Card, PayPal or Bizum

  International Shipping

International shipping available with MBE or Correos.

  Return policy

15 days for exchanges and returns (*)

Elceram Nitride 1/8 ESC: maximum power for on-road and off-road competition

The Elceram Nitride 1/8 ESC is Elceram's most powerful speed controller for 1/8 cars, suitable for both on-road and off-road. It delivers 220 A continuous and 1,500 A peak with 2S to 4S LiPo packs, and supports sensored brushless motors of up to 2,800 kV for those chasing maximum performance in competition.

Its aluminium nitride ceramic heatsink has very high thermal conductivity, and the ESC comes with an Elceram fan included, plus an intelligent fan connector and holder. On top of that you get low internal resistance thanks to the silver layers, reverse polarity protection and improved water and dust resistance.

The built-in colour TFT display lets you programme and check everything without a card or app: battery voltage, temperatures, pre-race diagnostics and post-race data. It adds features such as brake softening and a motor analyser, and mounts on the chassis with 3M GPH-110 double-sided tape or two M2.5 screws.

Nitride 1/8 or Oxide 1/8: which one should you choose?

Choose the Nitride 1/8 if you use powerful motors (up to 2,800 kV), race on-road or in very demanding off-road conditions, or want an included fan, brake softening and a motor analyser. The Oxide 1/8 stays at 200 A and 2,300 kV, with aluminium oxide cooling and a slightly narrower body (40 mm wide versus 43 mm): it is the choice for off-road buggies and truggies with more moderate motors.

Technical specifications

  • Scale: 1/8 on-road and off-road
  • Motor type: Sensored brushless (up to 2,800 kV)
  • Power supply: 2S - 4S LiPo
  • Continuous / peak current: 220 A / 1,500 A
  • BEC: 6 - 8.4 V adjustable, 6 A continuous / 15 A peak
  • Display: Colour TFT LCD, 160 x 80 pixels, matte finish
  • Cooling: Aluminium nitride ceramic heatsink, Elceram fan included
  • Wires: AWG10, 200 mm
  • Dimensions: 50 x 43 x 28 mm
  • Weight: 112 g without wires
  • Protections: Reverse polarity, ESC protection algorithms, improved water and dust resistance
  • Reference: ELC030
ELC030