Elceram Oxide 1/8 200A Brushless Sensored ESC 2-4S

ELC011
Elceram
€229.00

Buy this product and earn 229 points Buy this product and earn 229 points

Order it before 10 hours and 1 minutes and receive it tomorrow with GLS

  Secure Payment

Pay now with our secure payment systems. Card, PayPal or Bizum

  International Shipping

International shipping available with MBE or Correos.

  Return policy

15 days for exchanges and returns (*)

Elceram Oxide 1/8 ESC: total control for your 1/8 off-road buggy or truggy

The Elceram Oxide 1/8 ESC is a sensored brushless speed controller developed specifically for 1/8 off-road competition cars. It delivers 200 A continuous with 1,500 A peaks and runs on 2S to 4S LiPo packs, so it copes with powerful motors of up to 2,300 kV.

Its aluminium oxide ceramic heatsink, built with thick layers of silver and copper for low internal resistance, keeps temperatures under control in long mains and under heavy load. It also adds reverse polarity protection, intelligent ESC protection algorithms and improved water and dust resistance, which is welcome on dirt tracks.

The built-in colour TFT display lets you set throttle, brake, boost, turbo and hall angle without a programming card or app. It also shows battery voltage and ESC and motor temperatures in real time, and stores race data for later analysis. Install it with the double-sided tape included or with two M2.5 screws.

Oxide 1/8 or Nitride 1/8: which one should you choose?

Choose the Oxide 1/8 if you race off-road with motors of up to 2,300 kV: it offers 200 A and aluminium oxide ceramic cooling. The Nitride 1/8 steps up to 220 A and 2,800 kV, uses aluminium nitride (higher thermal conductivity), includes a fan, adds brake softening and a motor analyser, and also works for on-road. If your motor or track demands more, go for the Nitride.

Technical specifications

  • Scale: 1/8 off-road
  • Motor type: Sensored brushless (up to 2,300 kV)
  • Power supply: 2S - 4S LiPo
  • Continuous / peak current: 200 A / 1,500 A
  • BEC: 6 - 8.4 V adjustable, 6 A continuous / 15 A peak
  • Display: Colour TFT LCD, 160 x 80 pixels, matte finish
  • Cooling: Aluminium oxide ceramic heatsink
  • Wires: AWG11, 200 mm
  • Dimensions: 50 x 40 x 28 mm
  • Weight: 112 g without wires
  • Protections: Reverse polarity, ESC protection algorithms, improved water and dust resistance
  • Reference: ELC011
ELC011